Musicland music shop
CA 9 3000W Power Amplifier
  • CA 9 3000W Power Amplifier
  • CA 9 3000W Power Amplifier

CA 9 3000W Power Amplifier

KSh55,000.00

Experience the legendary sound of Crest Audio.

The Crest Audio CA 9 provides high power output coupled with true clarity, and is well-suited for high-powered subwoofers and passive full range systems. The CA 9 rack power amplifier is designed to achieve unsurpassed sonic performance and long-term reliability. With professional power-handling capabilities and exceptional low-end response, this power amplifier is an ideal choice for installations and touring applications that demand the finest audio quality.

Absolute sonic accuracy is the hallmark of every Crest amplifier. Bass is solid and defined to the limits of audibility, with ample current reserves delivered by an "over-engineered" power supply and advanced Class H circuitry. Wide-bandwidth output devices assure detailed, transparent high frequency response. And thanks to Crest's exclusive IGM circuit, the CA9 will drive 2 Ohm loads safely without compromise in performance.

The CA series provides tremendous value in proven amplifier technology. CAs form the backbone of discriminating rental systems and high-power club installations worldwide. Auditoriums, churches, regional tour sound companies and mobile DJs are all ideal candidates for the CA Series' combination of value and sonic quality.

 
Specs

CA 9 2000W Power Amplifier Specifications:

  • Model: CA 9
  • 8 Ohms Stereo Power: 600W 1kHz, 0.03% THD+N; 550W 20Hz-20kHz, 0.1% THD+N
  • 4 Ohms Stereo Power: 900W 1kHz, 0.03% THD+N; 800W 20Hz-20kHz, 0.1% THD+N
  • 2 Ohms Stereo Power: 1000W 1kHz, 0.03% THD+N; 900W 20Hz-20kHz, 0.1% THD+N
  • 8 Ohms Bridged Mono Power: 1800W 1kHz, 0.03% THD+N; 1600 W 20Hz-20kHz, 0.1% THD+N
  • 8 Ohms Bridged Mono Power: 2000W 1kHz, 0.03% THD+N; 1800W W 20Hz-20kHz, 0.1% THD+N
  • Max RMS Output Voltage (each channel): 82V
  • Peak Output Voltage (each channel): 116V
  • Frequency Response (+0 / -0.3dB, 1W/81/2):20Hz-20kHz, -3dB@135kHz
  • Power Bandwidth (rated power at 4 Ohms, 1% THD+N): 20Hz-20kHz, -.84dB/+0dB
  • TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input.
  • THD+N (rated power at 4 Ohm, 1kHz): <0.01%
    SMPTE IMD (rated power at 8 Ohms, 60Hz & 7kHz): <0.01%
    Damping Factor (10-400Hz at 8 Ohms): 700:1
  • Input CMRR (1kHz): > - 60dB
  • Input Sensitivity (rated power at 8 Ohms ): 0.775V standard (switchable)
  • Voltage Gain: X86.5 standard (switchable)
  • Input Impedance (balanced/unbalanced): >20kohms/>10kohms
  • Hum and Noise ("A" weighted, full power, 4 Ohms): -105dB
  • Crosstalk ("A" weighted, full power, 4 Ohms"): > - 60dB
  • Class: H
  • Input Connectors (per Channel): Female XLR (pin 2+, switchable for pin 3+), TRS (tip+)
  • Input Connectors (per Channel): Speakon connectors or 5-way output binding posts (market dependant)
  • Filter Storage: 80,000 mF
  • Power Supply (factory configured): 100V-240V, 50-60Hz
  • Idle Current Draw 120V: 2.0A
  • 1/8 Power Current Draw (typical music, 120V/4 Ohms) 8.6A
  • 1/3 Power Current Draw (continuous music, 120V/4 Ohms): 16.0A
  • Max Current Draw (circuit breaker rating, 120V/4 Ohms): 21.0A
  • Thermal Emissions (1/8 Power, 4 Ohms): 3250 BTU/hr
  • Thermal Emissions (1/3 Power, 4 Ohms): 4341 BTU/hr
  • Cooling: Back-to-front via 2 rear panel mounted variable-speed DC fans
  • (filters removable without tools)
  • Controls: Front Panel: 2 attenuators; Rear Panel Switches: signal ground lift,
  • mode select switch
  • LED indicators (per channel) Clip/Limit, Signal, Temp/DC, Active
  • Construction: Steel chassis, 16 gauge. Double thickness in rack ear areas.
  • Dimensions (W x H x D): 19" x 3.5" x 18", (483 x 89 x 458 mm)
  • Weight: 67 lbs. (31 kg)